ISO 22109:2026: What the Second Edition Adds to Valve Gearboxes
The second edition extends the rated-torque table, adds mechanical-advantage requirements beyond worm gearboxes and sets an 80% retention condition along the stroke, while keeping integral valve gears and subsea gearboxes outside its scope.
ISO 22109:2026 treats a valve gearbox as a self-contained mechanical unit with a rated output, an operating life and defined interfaces. The second edition, published in February 2026 as a 14-page replacement for the 2020 edition, extends the rated-torque classification and revises mechanical-advantage requirements. It also states two exclusions at the outset: gear systems integral to a valve's design and subsea gearboxes are outside the document.
What changed in the second edition?
ISO records four changes: additional rated-torque entries, mechanical-advantage provisions for gearboxes other than worm units, an 80% retention condition along the stroke and editorial changes.
Table 2 adds rated-torque classifications from 32,001 to 250,000. The public foreword identifies those entries as an extension of the classification table; the complete table and its conditions remain in the standard text.
Clauses 5.4.2 and 5.4.3 add mechanical-advantage requirements for gearboxes other than worm gearboxes. That change broadens the mechanical-output review beyond the gearbox type that often dominates manual valve operation.
Clause A.5 changes the mechanical-advantage condition along the stroke to above 80% of the initial value. This is a retention requirement across movement, not merely a value measured at one starting position.
What counts as a gearbox under this standard?
A gearbox is a self-contained gear unit that changes torque, thrust, speed or orientation and can be operated manually, automatically or with an actuator.
That definition covers more than a handwheel and worm. A unit can change the direction of motion as well as its magnitude, and it can be part of a manual, powered or combined operating arrangement.
The standard includes manual override gearboxes. Their purpose is to provide a manual operating path in an automated valve assembly, which means both the override function and its interaction with the powered drive belong to the assembly record.
A gearbox is therefore not treated as an anonymous adapter between an actuator and a valve. It has its own mechanical ratings and performance conditions.
Which valve duties are inside the scope?
The scope includes manual and automated gearboxes for on-off and modulating industrial-valve duties, together with classification, design and conformity-assessment guidance.
On-off and modulating service impose different operating patterns. A valve used for occasional isolation does not necessarily experience the same number or character of movements as one used for continuous modulation. The standard's inclusion of both makes the declared duty part of the gearbox assessment.
Manual and automated arrangements also have to be distinguished. The same valve can require a different gear train, interface and indication arrangement depending on how it is operated.
Other conditions of use beyond the standard's stated requirements are to be agreed between purchaser and manufacturer or supplier before ordering. The standard is a baseline, not a complete project specification.
What is expressly excluded?
Gear systems that form an integral part of a valve's design and subsea gearboxes are outside ISO 22109's scope.
An integral gear system is not a separable gearbox attached to a standard valve interface. Its design is embedded in the valve itself, so the boundary between valve and gearbox requirements is different.
Subsea gearboxes are excluded as a separate service environment. Their external conditions and qualification needs cannot be inferred from the general industrial-valve document.
These exclusions prevent a scope citation from being extended by analogy. A gearbox that falls into either excluded class requires its own applicable specification.
How are rated torque and rated thrust defined?
Rated torque is the manufacturer's classification for the gearbox's maximum operating-torque capability; rated thrust describes the maximum thrust available for linear output or withstood by a multi-turn output arrangement, as stated by the manufacturer.
These are declared ratings tied to the gearbox design. They are not the valve's required operating torque or thrust, and they do not establish that a particular valve can be operated throughout its process duty.
The distinction is similar to that between an actuator interface rating and valve operating torque. One belongs to the mechanical unit's capability; the other belongs to the valve and its service conditions.
A complete assembly review therefore has to compare the valve requirement with the gearbox rating without treating either number as a substitute for the other.
What does mechanical advantage describe?
Mechanical advantage describes how the gearbox changes the input effort into output force or torque, and the revised standard addresses both the value and its retention along the stroke.
A single initial value does not show whether the output remains consistent through movement. The 80% condition in Annex A makes the change along the stroke visible rather than accepting a favourable value at only one position.
For worm gearboxes and other gear types, the detailed provisions are not identical. The second edition specifically adds mechanical-advantage content for units other than worm gearboxes rather than applying one construction-specific rule to every design.
The public preview does not provide the calculation method. No efficiency, ratio or input-torque value should be reverse-engineered from the 80% statement alone.
Which operating features belong to the gearbox record?
End travel, end stops, endurance and position indication are separate features in the standard's definitions and each answers a different mechanical question.
End of travel is the predefined position associated with a fully open or fully closed condition. End stop is the mechanical device that stops drive-train movement. One defines the intended position; the other provides the physical limitation.
Endurance is the lifetime without failure under specified conditions, demonstrated by type test. It is not an unlimited service-life statement for every installation.
Indicating arrangement is the externally visible device showing the valve obturator's position. It gives the operator position information but does not itself establish valve shutoff or process performance.
Together, these features connect output rating with operability and test evidence.
How do the external interfaces enter the standard?
ISO 5210 and ISO 5211 provide the multi-turn and part-turn actuator attachments, while IEC 60529 supplies the enclosure-protection code.
The interface references mean the gearbox does not stand alone in the assembly record. Its attachment to the actuator or valve must agree with the relevant motion and mounting standard.
IEC 60529's IP code addresses protection provided by enclosures. That reference belongs to the gearbox's environmental construction; it does not turn the standard into a complete hazardous-area or subsea qualification.
The assembly can therefore require several documents at once: ISO 22109 for the gearbox, ISO 5210 or ISO 5211 for the attachment, and the applicable enclosure and project specifications.
Why does duty classification matter for endurance?
Endurance is demonstrated under specified conditions, so the declared on-off or modulating duty has to accompany any lifetime claim.
A gearbox used for repeated modulation may accumulate movements differently from one used for occasional isolation. The type-test evidence belongs to its stated test cycle and conditions, not to an arbitrary field profile.
The standard defines endurance as lifetime without failure under specified conditions and proved during type test. That wording makes both the test conditions and the failure criterion part of the evidence.
A rated torque or thrust does not replace that endurance record. Output capability and operating life are related design questions, but neither one can be inferred from the other without the applicable test data.
What does conformity assessment not establish?
Conformity assessment establishes evidence against the invoked requirements; it does not establish that the gearbox is suitable for every valve or process condition.
The valve's required torque, thrust, travel and operating pattern remain application inputs. The gearbox's rating and type-test record have to be compared with those inputs before the assembly can be evaluated.
Nor does conformity to ISO 22109 automatically establish conformity of the complete automated valve. Actuator, mounting kit, valve, controls and enclosure requirements may each carry additional records. The purchaser must also identify which edition of each companion document applies to the order.
This is why the purchaser–supplier agreement named in the scope remains important. Project-specific conditions that differ from the standard's stated requirements must be settled before ordering rather than assumed after delivery.
Where does the public record stop?
The public preview provides the revision notes, scope and definitions, but the complete rating tables, design requirements, mechanical-advantage method and type-test procedures remain in the standard text.
The added torque classifications cannot be used to select a gearbox without the complete table and its conditions. The 80% retention statement likewise does not publish the test sequence or acceptance record.
The standard's conformity-assessment guidance does not establish that any individual gearbox conforms. That requires the manufacturer's declaration and the applicable type-test and order records.
What does the second edition add up to?
The second edition makes the gearbox's mechanical output more explicit across a wider rating range and across the stroke, not just at a single initial point. It also keeps the unit's scope distinct from integral valve gears and subsea equipment.
The useful result is a more complete mechanical record: rated output, mechanical advantage, endurance, travel limitation, indication and external interfaces all belong to the gearbox assessment.
What this article does not cover
Note that this article does not reproduce rating tables, calculate gearbox ratio or efficiency, select a gearbox, perform a type test or assess subsea equipment. It records the public scope and revision logic of ISO 22109:2026 and is not a conformity determination.
Where the next constraint sits
The valve-side selection order — function, class and material before actuation details — is set out in Valve Selection Guide: From Function to Class to Material.
The owner-specification layer around a pipeline ball valve is covered in IOGP S-562 Version 4.0: The Owner Overlay Reaches the Pipeline's Commonest Valve.
Sources
| # | Basis |
|---|---|
| 1 | ISO 22109:2026, Industrial valves — Gearboxes for valves, Edition 2, published 2026-02, 14 pages, replacing ISO 22109:2020 — the official ISO catalogue page, https://www.iso.org/standard/89903.html |
| 2 | The added rated-torque entries, mechanical-advantage revisions and 80% retention condition; the scope and exclusions; the definitions of gearbox, rated torque, rated thrust, end travel, end stop, endurance and indication; the ISO 5210, ISO 5211 and IEC 60529 references — the ISO Online Browsing Platform public preview, https://www.iso.org/obp/ui#!iso:std:iso:22109:ed-2:v1:en |